Contact US

Sales service
 
Roya info@optostar.com.cn ouyangroya   Felix sales3@optostar.com.cn optostar3
 
Tiffany sales4@optostar.com.cn optostar2   Delia sales5@optostar.com.cn optostar66
 
Fanny sales6@optostar.com.cn optostar11   Vicky sales8@optostar.com.cn sales6star
 
Sale-after Service
 
Nick technician@optostar.com.cn live:technician_119        
 
                         

×
 
web design

Hover

 
OP-PC-4E1-FE Ethernet to 4 E1 Protocol Converter is based on FPGA, using reverse direction multiplexing technology to bundle for multiple E1 circuits to transmit the Ethernet data of 4Channel 100BASE-TX. It can realize 1~4 E1 channel to convert between Ethernet optical interface. This device can transmit the transceiver signal point to point to Ethernet optical interface to make E1 channels interconnected with Ethernet optical interface. Unlike general remote network bridge, this device can support 1-4Channel E1 channel configuration, can automatically detect the number of E1 and select the E1 available. It allows E1 lines transmission time delay difference.

         Product Features
 
  • Based on self copyright IC.
  • To achieve Ethernet data transparent transmission in 1-4E1 circuits
  • Can realize the local and the remote device reset
  • Ethernet Interface is 100BASE-FX, support VLAN protocol
  • Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering function
  • Single Channel lines rate is 1984Kbit/s, 4Channel Bandwidth is up to 7936Kbit/s
  • Support all set of Ethernet Work Mode
  • CRC automatic alarm threshold can be set to isolate the poor quality transmission lines and cut off a single-direction. When 2M branch circuit one direction error rate exceeds threshold, cutting off this direction the other direction is not affected; that is to say, both of the Ethernetdirection transmission can be asymmetric
  • Allow 4Channel E1 transmission time delay difference 100ms. When the margin exceed the allowed range, the system can automatically stop on the E1 that time delay is too large to send data
  • E1 interface conform to ITU-T G.703, G.704 and G.823, not support the use of signal timeslot
  • E1 interface module with inter-set clock recovery circuit and HDB3 code circuit
  • Support E1 channel hot-plug in the device, and automatically detects the effective E1 channel and will not interrupt data transmission
  • Can support 1-4Channel E1 channel configuration, can automatically detect the number of E1 and select the E1 available;
 

PARAMETER APPLICATION DOWNLOAD CONTACT US

PARAMETER

 
OP-PC-4E1-FE   Ethernet to 4 E1 Protocol Converter
Ethernet interface (10/100M)
Interface rate 10/100 Mbps, half/full duplex auto-negotiation
Interface Standard Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability 4096
Connector RJ45, support Auto-MDIX
E1 Interface 
Interface rate n*64Kbps±50ppm
Interface Standard comply with protocol G.703
Interface Code HDB3
E1 Impedance 75Ω (unbalance), 120Ω (balance)
Jitter tolerance In accord with protocol G.742 and G.823
Allowed Attenuation 0~6dBm
Dimension
Product Size 216X140X31mm(WXDXH)
Simple packaging 274X193X84mm(WXDXH)
Piece Weight 1.2KG
Operation Environment
Operating temperature -10°C ~ 50°C
Storing temperature -40°C ~ 80°C
Relative humidity 5%~95 % (no condensation)
No causticity and solvent, dust free, and no strong magnetic interference.
Power
Voltage AC180V ~ 260V;DC –48V;DC +24V
Consumption ≤5W
Warranty 2 Year Warranty, Life-time Maintenance

APPLICATION

 

 
 

DOWNLOAD

Model
Description
DownLoad
OP-PC-4E1-FE Ethernet to 4 E1 Protocol Converter
 
Package Include
No
Package List
1
Ehernet to 4 E1 Protocol Converter
2
User Guide
3
Warranty Card

CONTACT US

Thanks very much for your interest in OPTOSTAR,we are always glad to hear from you, please leave your message or contact us through details as below, we will respond as soon as possible.I believe that OPTOSTAR can bring you the greatest value!


(Please note the uppercase letters)   
  • A-14,Haide Building,the Intersection of Nanxin Road and Haide Second Road Nanshan District,Shenzhen,P.R.China(Office)
  • D Buliding,Technology Business Incubator,XinHangGang 2rd Road,Shuangliu District,Chengdu,P.R.China(Active Product Factory)
  • 18A-3,The Third Industrial Pork, Tangtou Village Shiyan Town Baoan District,Shenzhen,P.R.China(Passive Product Factory)
  • Email:info@optostar.com.cn
  • 0086-755-26400198/0086-0755-26400288   Fax:0086-755-26411001
 

Why OPTOSTAR

Shenzhen Optostar Optoelectronics Co., Ltd. was founded in May 2006 and headquartered in Nanshan District, Shenzhen, China. As a leading manufacturer and supplier for fiber optical components and system products in China, we can provide our customers with active components such as GPON/EPON, all serial SFP transceivers, Media Converters, PDH multiplexers, EDFAs, Video Multiplexers which are used for telecommunication, network and security. We are also producing passive components such as Patch Cords, CWDM, DWDM, PLC splitters and so on.

Our company has a lot of advantages based on 10 years of experience in the optical telecommunication industry: Perfect techniques and producing plant, Abundant technology development capability with 10 persons R&D team, Rich OEM & ODM co-operation experience with famous overseas companies, Strong ability to provide whole network solutions. We owned 2 production plants which the total area is more than 6000sqm and more than 300 workers and 50 technicians and 1 headquarter office which has sales team of around 30 persons. After more than ten years of operation, Optostar has successfully developed the worldwide market. Our products are widely accepted by the customer from all of the world and win good reputations by themselves. We promise to provide our customers with high quality products and nice services. To achieve your 100% satisfaction is our persistent goal all along!


products Support&Download Order Transaction Who We Are