Contact US

Sales service
 
Roya info@optostar.com.cn ouyangroya   Felix sales3@optostar.com.cn optostar3
 
Tiffany sales4@optostar.com.cn optostar2   Delia sales5@optostar.com.cn optostar66
 
Fanny sales6@optostar.com.cn optostar11   Vicky sales8@optostar.com.cn sales6star
 
Sale-after Service
 
Nick technician@optostar.com.cn live:technician_119        
 
                         

×
 
web design

Hover

 
OP-PC-E1-FE provides one Framed 2048K E1 interface and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel. It is a high performance, self-learning Ethernet bridge. This device is the extension device of Ethernet, using network (PDH/SDH/Microwave) that provide E1 channel to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost. The device has inter-set loop test function to facilitate the project launching and daily maintenance.

         Product Features
 
  • Based on self copyright IC.
  • Can realize monitor and control of remote equipment, OAM management data did not take up user’s timeslot and save E1 bandwidth
  • E1 supports any timeslot set, the rate is 64K-2048K
  • The local device can forced the remote device rate follow it
  • Have the function of E1 interface loop back check, avoid the converter crashed because of interface loop return;
  • Have indicator when the device is power-off or E1 line is broken or lose signal;
  • Can set the E1 line that not to send the LINK signal to Ethernet interface while E1 line is broken;
  • The Ethernet interface supports jumbo frames (2036 Bytes);
  • Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering
  • Ethernet interface supports10M/100M, half/full duplex auto- Negotination and AUTO-MDIX(crossed line and straightly connected line self-adaptable );
  • Have Ethernet monitor self-reset function, the equipment will not dead
  • Can achieve the remote device setting any 5 mode of Ethernet and can closed the AUTO-MDIX function;
  • Provide 2 clock types: E1 master clock and E1 line clock;
  • Have three Loop Back Mode: E1 interface Loop Back (ANA)、Ethernet interface Loop Back(DIG)、Command the remote Ethernet interface Loop Back(REM)
  • Provide 2 impedances: 75 Ohm unbalance and 120 Ohm balance;
 

PARAMETER APPLICATION DOWNLOAD CONTACT US

PARAMETER

 
OP-PC-E1-FE   Framed Ethernet to E1 Protocol Converter
Ethernet interface (10/100M)
Interface rate 10/100 Mbps, half/full duplex auto-negotiation
Interface Standard Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability 4096
Connector RJ45, support Auto-MDIX
E1 Interface 
Interface rate n*64Kbps±50ppm
Interface Standard comply with protocol G.703
Interface Code HDB3
E1 Impedance 75Ω (unbalance), 120Ω (balance)
Jitter tolerance In accord with protocol G.742 and G.823
Allowed Attenuation 0~6dBm
Dimension
Product Size 216X140X31mm(WXDXH)
Simple packaging 274X193X84mm(WXDXH)
Piece Weight 1.2KG
Operation Environment
Operating temperature -10°C ~ 50°C
Storing temperature -40°C ~ 80°C
Relative humidity 5%~95 % (no condensation)
No causticity and solvent, dust free, and no strong magnetic interference.
Power
Voltage AC180V ~ 260V;DC –48V;DC +24V
Consumption ≤5W
Warranty 2 Year Warranty, Life-time Maintenance

APPLICATION

 

 
 

DOWNLOAD

Model
Description
DownLoad
OP-PC-E1-FE Framed Ethernet to E1 Protocol Converter
 
Package Include
No
Package List
1
Framed Ethernet to E1 Protocol Converter
2
User Guide
3
Warranty Card

CONTACT US

Thanks very much for your interest in OPTOSTAR,we are always glad to hear from you, please leave your message or contact us through details as below, we will respond as soon as possible.I believe that OPTOSTAR can bring you the greatest value!


(Please note the uppercase letters)   
  • A-14,Haide Building,the Intersection of Nanxin Road and Haide Second Road Nanshan District,Shenzhen,P.R.China(Office)
  • D Buliding,Technology Business Incubator,XinHangGang 2rd Road,Shuangliu District,Chengdu,P.R.China(Active Product Factory)
  • 18A-3,The Third Industrial Pork, Tangtou Village Shiyan Town Baoan District,Shenzhen,P.R.China(Passive Product Factory)
  • Email:info@optostar.com.cn
  • 0086-755-26400198/0086-0755-26400288   Fax:0086-755-26411001
 

Why OPTOSTAR

Shenzhen Optostar Optoelectronics Co., Ltd. was founded in May 2006 and headquartered in Nanshan District, Shenzhen, China. As a leading manufacturer and supplier for fiber optical components and system products in China, we can provide our customers with active components such as GPON/EPON, all serial SFP transceivers, Media Converters, PDH multiplexers, EDFAs, Video Multiplexers which are used for telecommunication, network and security. We are also producing passive components such as Patch Cords, CWDM, DWDM, PLC splitters and so on.

Our company has a lot of advantages based on 10 years of experience in the optical telecommunication industry: Perfect techniques and producing plant, Abundant technology development capability with 10 persons R&D team, Rich OEM & ODM co-operation experience with famous overseas companies, Strong ability to provide whole network solutions. We owned 2 production plants which the total area is more than 6000sqm and more than 300 workers and 50 technicians and 1 headquarter office which has sales team of around 30 persons. After more than ten years of operation, Optostar has successfully developed the worldwide market. Our products are widely accepted by the customer from all of the world and win good reputations by themselves. We promise to provide our customers with high quality products and nice services. To achieve your 100% satisfaction is our persistent goal all along!


products Support&Download Order Transaction Who We Are